Tips For Replacing a Window Handle
It is easy to replace your window handle from the convenience of your own home. Follow these tips to ensure a smooth and beautiful finish.
Remove the screws from your uPVC handle to expose the screws. Measure the spindle's length to ensure you get the correct size replacement.
1. Measure the Spindle length
If you're replacing a window handle it's important to get the size of the spindle correct. It can influence the tightness or looseness of the handle, as well as whether the handle will lock properly into the window frame. The spindle is a metal shaft that connects the handle to the lock on the window frame. The spindle is either a standard industry 8mm cross-section or older 9mm versions. The current industry standard is 8mm however this wasn't always the case so when purchasing a new handle, it's essential to check the dimensions.
The most efficient method to determine the length of the spindle is to remove the handle that is currently in place This can be accomplished by turning it into the open position and then removing the two screws (which might be hidden behind plastic caps that need to be removed) which hold the handle. After the handle is removed, measure the distance from the base to the end. This will provide you with the measurements you need to buy a replacement.
There are many options available when you are looking to pick the perfect window handle. From sleek chrome that will fit in with a modern style, to traditional bronze with a burnished finish that looks stunning in restored Georgian rooms, or the more quaint Tudor Cottages with curled mongoose tail latches. The options are endless but the most important thing is to choose a style that complements your home.
Espag handles are commonly used to uPVC window frames and are always the same size, with a 43mm centre. Cockspur handles vary between 58mm and 62mm, but luckily there are replacements available for both sizes. Cadenza window handles are different in size as they have an angled blade that operates a multi-point locking mechanism inside the window.
When choosing a window handle it is important to consider the hand you use to open your door. Inline espag handles can be used for left or right-handed windows. Cranked window handles can only be used for windows that open in one direction.
2. Remove the Handle
A window handle that is sagging can be frustrating, regardless of whether the handle is damaged or worn out. The good news is, you can repair the uPVC handle yourself. All you require is a few basic tools and a bit of time to complete the task.
You must first open the window and make sure it's not locked. Next, you need to remove the screw caps that are holding the handle in place. Once the screw caps have been removed you will be able to take off the handle.
The handle is connected to a spindle in the window frame. Depending on the type, this is secured by a screw or pin. The most commonly used handles are the inline Espagnolette and cockspur handles. Both kinds of handles can be found on casement windows including aluminium ones. The handles can be locked with a key to block access by unauthorised persons from outside. You can also lock the handles by turning them clockwise.
To take the handle off, you'll need a screwdriver with a flat blade to loosen the clip that holds the handle. Once the clip is released, the handle will be able to slide off the spindle. After the handle has been removed, you'll need to measure the length of the spindle to make sure that the new handle is compatible with this size.
Once you have decided on the proper size of the handle, screw it into place. It is essential to make sure that the handle is securely fastened and that it is rotating in the correct direction (clockwise in the case of an open, or counterclockwise if the handle closes). It is essential to make sure that the handle has not been placed upside down.
Then, you must replace the screw cover caps. Once you've completed this step, you should test the handle to make sure it's functioning properly. You can also test the locking mechanism by shifting the handle from the unlocked position to the locked one and then back.
3. Take off the Screws
A uPVC handle is an essential element of any home and is the first thing that shows signs of wear or damage. door handles can be due to natural elements, regular use, or even damage caused by criminals looking to gain access to your home. A simple fix can resolve the issue and prevent it from occurring again.
uPVC handles may also be difficult to remove when the locking mechanisms aren't working correctly. In most cases, the issue can be resolved by replacing the multipoint lock rather than the entire handle and it's worthwhile to check this out since it can save you money.
Once you've removed the old handle, you'll need to take off the screws that were that held it in place. These screws are usually found on the inside of the handle's base. It is possible to use a screwdriver in order to accomplish this. Be cautious not to over tighten the handle since this could cause it to become loose.
You will then need to find the fixing pins or screws that hold the new handle in the correct position. These are usually located on the inside of the base of the handle. You will need a screwdriver to take them off. If you wish to replace them, you can do so by replacing the caps on the screw and test the handle to make sure it works correctly.
When you're ready to install the new handle, simply align the spindle with the cut-out in the window mechanism and screw it into place. If you're looking to replace the screw covers, make sure the handle is in a position that is open and that any screws are securely attached. It's done! You can enjoy the newly installed window handle. This should help you avoid expensive window and door replacements in the future. Contact us if you require more information on this or any other aspect of your uPVC window.
4. Install the New Handle
The process of replacing a broken window handle or updating it is easy and can be accomplished in a few easy steps. The key is to identify the kind of handle, determine its spindle, and determine what tools you'll need to complete the job. Always ensure safety when working with windows and tools. Make sure you follow the steps and make sure that you have the right handle to use.
The first step is to find the screws that hold your existing window handle in place and take them out, while maintaining an appropriate grip on the handle itself to stop it from crashing and causing injury. Once the screws are removed, you can put them in a secure location to be replaced in the future.
After you have removed the handle, you can begin installing your new handle. It is important that the handle fits perfectly to ensure it works properly and locks the window in its place. Next move the metal bar that is square on the handle into the hole for the window mechanism.
Once the new handle is in place, the final step is to replace the caps on the screws and test it to make sure it functions. If you're not satisfied with the result or if your window doesn't open and close as it should then the next step is to contact our experts who will be able to help.
The majority of homes in the UK have uPVC windows and as such, many of them will have to be replaced at some point due to damage or wear. Anyone with a little DIY experience can easily accomplish the task. It is crucial that the handle you use is in line with the style and size of the window. If you're not sure what type of handle you need, feel free to get in touch with our team who can provide you with the possibilities available.